home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Wayzata's Best of Shareware PC/Windows 1
/
Wayzata's Best of Shareware for PC-Windows - Release 1 - Wayzata Technology (1993).iso
/
mac
/
DOS
/
PRINTERS
/
LETKIT35
/
README.TXT
< prev
Wrap
Text File
|
1993-01-10
|
6KB
|
113 lines
------------------ README.TXT FOR THE LASER LETTERHEAD KIT -------------------
Thank you for your trial use of The Laser Letterhead Kit. You will need an IBM
286, 386, 486, or higher computer (no special extended or expanded memory
requirements), DOS 3.0 or higher, and a Hewlett-Packard LaserJet printer or a
100% compatible. All LaserJet printers, except the original LaserJet, may be
used. The printer must use HP's Printer Command Language (PCL) version 4 or
higher. Dot Matrix and most ink jet printers do not use this command language.
The Kit will install on a hard disk or floppy diskette, 720K or larger. A 360K
diskette will not hold the files expanded during the INSTALL program.
The INSTALL program has been designed for use after downloading LETKIT35.EXE
from a BBS. It will install from a hard disk to the same or different hard
disk. It will also install from or to a floppy diskette/hard disk. The only
caution is not to install it in the same drive and directory where the down-
loaded files are currently located.
There are 5 files to be extracted from LETKIT35.EXE:
(1) FONTS.EXE (2) INSTALL.EXE (3) LLHK.EXE (4) PCX.EXE (5) README.TXT
If any of these 5 files are missing, please contact your shareware distributor
or CPI Sofware. It is necessary to use the INSTALL program to properly set up
the files and enter your installation input into The Laser Letterhead Kit's
setup program. Immediately after the installation, you may print letterheads.
All of the necessary PCL bit map soft fonts and PCX images are included in the
above. You do not need an additional program to download soft fonts to your
laser printer. Nothing more is needed. The Laser Letterhead Kit does it all.
If all of the above 5 files are in the current drive/directory on a hard disk
or floppy diskette, you may install The Laser Letterhead Kit by typing:
INSTALL (then strike the ENTER key)
Follow the on screen instructions. After The Laser Letterhead Kit is installed,
the README.DOC file will be available in the directory or on the diskette
where you placed the program files. The README.DOC file contains instructions
for using and customizing The Kit.
You may view the README.DOC file by logging on to the directory or diskette
where The Laser Letterhead Kit is located, and typing:
BROWSE README.DOC (then strike ENTER key)
Since you will need to use the README.DOC file as INSTRUCTIONS when The Kit is
up and running, you may want to print a copy on your laser printer by typing
either of the two commands, while logged on to The Kit's directory or diskette:
PRINT README.DOC or, TYPE README.DOC > PRN (then stike ENTER key)
The README.DOC file is 5 pages long and will supply you will all necessary
information to operate and customize The Laser Letterhead Kit to your needs.
The Kit is started by typing LP and striking the ENTER key.
- A Product of CPI Software, Post Office Box 47097, St. Petersburg, FL 33743 -
Technical Assistance: Voice/Message/Fax 813-544-0212
Member of the
Association of Shareware
Authors and Distributors
The Laser Letterhead Kit has been produced by a member of the Association of
Shareware Authors and Distributors, and as such, has met their demands for
professional programming. Any problems of a shareware nature that cannot
be resolved by CPI Software, may be brought to the attention of the ASAD
Ombudsman for possible correction. Please send all information, including
the name and address of the person or company you received The Laser
Letterhead Kit from, to: ASAD, ATTN: Ombudsman, 2425 North Limestone Street,
Springfield, Ohio 45503-1109.
-------------------------------------------------------------------------------
REGISTRATION FORM
-------------------------------------------------------------------------------
Registration will entitle you to receive the Commercial Edition of Laser
Letterhead plus, a printed Handbook, and the Basic Customizing PCX Pak. The
PCX Pak contains forms for obtaining one PCX text based logo, one PCX
letterhead image, and one PCX watermark image at NO COST TO YOU. You will
also receive 7 typeface font families encompassing 68 PCL soft font files.
Do not include instructions for creating your free letterhead, logo, and
watermark. This is done with the PCX Pak above after it is received.
Templates are available at extra cost that will place your PCX Letterheads
into WordPerfect or Word for Windows.
Name:________________________________________Telephone:(_____)____________
Business Name:____________________________________________________________
Street Address:___________________________________________________________
City, State, Zip:_________________________________________________________
Disk Size: __1.2M HD 5.25" __1.4M HD 3.5" Laser Name:_________ RAM:_______
Check if User is Vision Impaired & Requires Large Screen Font Driver:_____
Registration Fee: Each Single User...............: ___@ $25.00....:_______
Florida Residents Add 6% State Sales Tax (Pinellas County 7%).....:_______
Shipping/Handling for US or Canada add $4.95 (Others add 8.95)....:_______
Total.............................................................:_______
Make Checks/Money Orders Payable to CPI Software and Send with this form to:
PO Box 47097, St. Petersburg, Florida 33743-7097 USA - FAX 813 544-0212
All Currency in US dollars Drawn on a Bank or Branch Located in the USA
- Allow up to 2 or 3 Weeks for Processing and Delivery - VERBBS35K10193 -
---------------------------- END OF README.TXT ------------------------------